+91 85 110 98822

sales@uflowvalve.com

After Sales Support: +91 757 5868 662

Angle Seat Valves

3 Way Control Valve (NC / NO) - TCP Series

Valve Information
Port:

Refer below technical data sheet (Available BSP / NPT)

End Connection:

Screw End / Flange

Body Material:

SS ASTM A351 Grade CF8

Seal:

PTFE / VITON

Circumstance Temp:

-10°C to 70°C

Media Temp:

-10°C to 180°C

Media:

Steam, Air, Water, Chemical, Gases, Oil, Diesel, Hot Water

Leakage:

As per ANSI B16.104 - 1976Teflon seating class IV. For other soft seating class VI Drop Tight/Bubble Tight.

Stem Packing:

Self adjusting, Spring loaded Teflon packing.

Air Quality:

Lubricated /Non-lubricated.

Actuator (Spring Return) Type
Cover:

CF8

Plate:

CF8

Working Pressure:

4.5 to 7 bar air (Not Recommended actuator for pneumatic pressure above 7 bar)

Life:

1 million cycle

Other Technical Data:

Available on Request

Seal Material:

NBR / VITON

More Information
Whatsapp Inquiry
Manual Download PDF
  • Diverting
  • Mixing
  • Opration
  • Technical Data

Diverting

  • Valves can be used for introducing two different fluids (mixing) through two different ports to common port 'AB'.

Mixing

  • One fluid coming through port 'AB' can be diverted to 'A' port or 'B' port

Opration

  • In normal condition, 'A' port is closed and 'AB' port is connected to 'B' or 'B' port is connected to 'AB' port. On receiving pilot pressure, 'A"port is connected to 'AB' or 'AB' port is connected to 'A' closing port B.

Technical Data

Model No. Body Material Pipe (Inch) Orifice (mm) Min. Operating Pressure Kg/cm² Max. Operating Pressure Kg/cm² Seal & ‘O’ Ring Material Flow Factor Kv m³ / hr
TCP-8Z CF8 2" 45 0 7 PTFE 35
Angle Seat Valves Manufacturers Suppliers in worldwide Manufacturers And Suppliers In Indonesia, India And Other Worldwide Countries.